Farma

Softeners

More information

Description

Specifications

Parameters

Accessories

Compact systems to remove hardness and prevent the formation of lime deposits.

Feed water enters the unit and passes through the ion exchange resin, causing calcium and magnesium ions to be replaced with sodium ions to produce softened water. Periodically, the exchanged calcium and magnesium are removed from the resin by regeneration using a salt solution supplied from the brine tank. The regeneration process is fully automatic.

Characteristics:

Reinforced fiberglass cylinder
Premium grade ion exchange resin
Automatic timer controls
Salt container for the production of saline solution (brine)
Control valves made of corrosion-resistant materials
Bypass of feed water to the service during regeneration

Accessories:

Raw water break tank and booster pump
Soft water storage tank
Particulate filters (1-50 microns)
Distribution pipes and valves
hardness test kit

Flow rate: (l/hr)	CS10	CS14	CS23	CS30
Maximum service	300	420	670	1440
Minimum service	60	80	120	120
Maximum effluent	240	240	360	500
Regeneration output: (liters)
Feed water TH = 200mg/l (as CᵃCO3)	2700	3800	6300	8600
Feeding water TH = 350mg/l (as CᵃCO3)	1500	2200	3600	4900
Regeneration:
Salt used (kg)	1.6	2.2	3.6	4.8
Salt capacity (kg)	25	40	50	65
Time (mins)	82
Connections (inches)
Inlet	1/2″ Hosetail			3/4″
Outlet	1/2″ Hosetail			3/4″
Drain	1/2″ Hosetail			3/4″
Dimensions: (mm)
High	650	790	1095	924
Width	240			320
Hondo	430			517
Weight: (kg)
Weight	15	19	28	74

Requirements:
Power supply	240 volts 50Hz single phase
Feed water pressure	2-6 barg (30 to 90 psig)
Feed water temperature	1-49°C
Drainage	Adequate drainage at ground level