Portable Sampler Model 6712 Full-Size

• Portable Automatic Sampler.
• Quick and easy programming through intuitive guided menus in English.
• Operation by means of peristaltic pump, performing sample collection at the speed recommended by the EPA (0.6 m/s), even at suction heights of 8 meters.
• Sampling volume accuracy of ± 5 ml, calculated by means of a peristaltic pump revolution counter and ISCO's patented liquid pressure detection system.
• Communication with SDI-12 protocol, allows the connection of multiparameter probes by recording in memory the probe data, measures flow rate by connecting the Isco 700 series flow rate modules.

Dimensions (HxD): 68.6 x 50.7 cm

Weight: 15 kg

Insulated base: With ice tank for sample preservation, with 24 bottles of 1 liter.

It can be configured with different number and size of bottles:

– 24 1 liter polypropylene wedge-shaped bottles / 24 glass 350 ml bottles.
– 12 1 liter polyethylene round bottles / 12 1 liter glass round bottles.
– 4 bottles of 3.8 liters of polyethylene / 4 bottles of 13.8 liters of glass.
– 1 bottle of 10 liters of polyethylene / 1 bottle of 10 liters of glass.
– 1 bottle of 15 liters of polyethylene.

– Sampling principle: peristaltic pump.

– Suction line:

Length: 1 to 30 meters.

Material: Vinyl (or other materials for special applications).

Internal diameter: 9 mm.

– Maximum suction height: 8,5 9 meters

– Repeatability: ± 5 ml.

– Automatic liquid detector by pressure at the pump inlet. Automatically compensates for different suction heights.

Dimensions (HxWxD): 26.1 x 31.7 x 25.4 cm

Weight: 5.9 kg

Operating temperature: 0ºC to 49ºC

NEMA 4X, 6 (IP67) double-wall ABS plastic housing with high resistance to corrosion and weathering

Power supply: 12V battery or 220V converter / power supply.

Communication interfaces: RS-232 and SDI-12 allow Plug&Play connection of multiparameter water quality probes of any brand without the need for additional interfaces.

Data transfer to PC through Flowlink software, also the “Storm Program” (optional) allows, connected to an ISCO flowmeter, to take samples activated by weather, level and rainfall.

Connection to flow measurement modules: Any ISCO flow measurement module:

710 ultrasonic flow measurement module.

720 flow measurement module by pressure probe.

730 flow measurement module by bubbler probe.

750 flow measurement module by area/velocity probe.

They are plugged directly into the socket and are automatically identified. The module management software is included in the sampler’s RAM memory.

Modules for flow measurement
Rain gauge
Multiparameter probes for measuring: pH, Conductivity, Temperature, dissolved oxygen, Turbidity, Chlorophyll, etc.
GSM bidirectional modem.
Flowlink Software

Other accessories according to application, please consult us