Portable O2/CO2 Analyzer model Servoflex 5200 MiniMP

• Portable/benchtop O2 and CO2 analyzer designed for laboratory and industrial use.
• Easy and intuitive to operate, measuring O2 or CO2 or both, the Servoflex MiniMP 5200 covers a wide range of measurement applications, including CEMS testing and verification.
• The only truly portable, battery-powered gas analyzer with MCERTS and TUV certification.
• Servomex paramagnetic cell oxygen measurement technology complies with European and U.S. pharmacopoeia standards for medical oxygen analysis.
• Rechargeable lithium batteries (optional).
• Backlit LCD display, with simultaneous reading of all parameters, alarms and messages.
• Membrane keypad for calibration, adjustment and alarm configuration.

O2 sensor
Technology: Paramagnetic Magnetodynamic Servomex
Range: 0 – 100 % O2
Version: Standard 1dp
Accuracy: General use: ± 0.2 % O2
Stable environment (lab): ± 0.1 % O2
Zero drift: ± 0.4 % O2 / week
Response time (T 90): <10 sec. approx. at 10 psig inlet pressure CO2 sensor
Technology: CO2 Infrared Servomex
Range: 0 – 50 %
Accuracy: General use: ± 2 % of range
Stable environment: ± 1 % of range
Zero drift/week: ± 4 % of range
Response time (T 90): <10 sec. Communications:
Digital: RS232
Datalogger: 200 readings.
Analog outputs: 2 x 4-20 mA
Alarms: Two per concentration and one fault alarm.
Display, LED and audible alarms.
Power supply: 220 V AC/ 50-60 Hz
Dimensions: 15 x 26 x 30 cm
Weight: 2.6kgs – 3.9kgs (depending on configuration)

Sample conditions:
Sample: Clean, dry, non-flammable gas.
Flow rate: 1.5 – 6 liters/min.
Inlet pressure: 7 kPa (minimum) to 70 kPa (maximum)
Operating temperature: -10º C to 50º C

Oxygen (O2 )
Carbon dioxide (CO2 )

Consult according to application