Portable moisture analyzer model WATERBOY 2

The WaterBoy 2 Analyzer is a portable and cost-effective solution for accurate moisture measurement. Equipped with proven electrolytic technology and advanced microprocessor-controlled electronics, it ensures reliable analysis in any environment. Its intuitive three-button interface simplifies navigation, allowing the user to select from five display options at the touch of a button. Characteristics:

• Stable value indication / Low battery indication
• Units of measure: Microprocessor-based electronics allow a choice of display options, including ppmV, ppmW, lbs/mmscf or °C and °F dew point.
• Three-button user interface: The Mode/Enter key, along with the simple Up and Down keys, make menu use quick and easy.
• LCD display: The integrated digital display allows direct point-of-use indication and quick configuration of control parameters in the field. It also includes a low battery indicator light.
• Scalable output: flexibility to change output scales in the field. No need to replace electronic components. Simply access the menu via the Mode/Enter key and select the output scale.
• In-line verification: use the simple Delta Flow procedure to quickly verify the linearity and performance of the sensor in-line.
• Approvals: FM Class 1 Division 2 approved, non-flammable. The electrolytic technology is specified by the European Pharmacopoeia for the analysis of moisture in medical gases.

Available versions: * WATERBOY 2+: designed for application in production, purification, filling and final product control of industrial and medical gases. * WATERBOY LP2: Low pressure humidity version (5-100 psig)

Performance	WATERBOY 2
Operating range (0.5 ppmV LDL)	0-1000 ppmV with a resolution of 0.1 ppm (100 cc flow units) 0-5000 ppmV with a resolution of 1 ppm (10 cc flow units)
Accuracy (better of)	±5 % of reading or 0.4 ppm, whichever is greater **
Operating temperature	-20°C to +60°C (-4°F to 140°F)
User interface	3-key touch panel
Display	1-line, 16-character, alphanumeric LCD, 3/8″ high digits
Display options	ppmV, ppmW (requires user input of molecular weight), °C and °F dew point and lbs/mmscf (Note: dew point in °C and °F refers to atmospheric pressure. Pressure dew point is available with user input of operating pressure).
Gas handling system and conditions
Gas connections	1/8″ compression (consult factory for gas compatibility)
Inlet Pressure	50-3000 psig
Flow rate	Sample: 10 sccm or 100 sccm Bypass: 1000 sccm
Dimensions H x W x D [inches (mm)].	12″ (30.5cm) x 8 3/4″ (22.2cm) x 6 1/4″ (15.9cm)
Weight	7.7 kg (17 lbs)
Electric
Alarm indicators	0-1 VDC output at 2k ohms or more (standard). Programmable field range Isolated RS232 (optional). Reduces battery operating time by 50% (Not FM approved).
Power requirements	24 VDC internal rechargeable lead-acid battery with a rated capacity of 2.6 ampere-hours (suitable for a typical 5-day operation at room temperature) MEECO-supplied external 24 VDC 110 VAC wall transformer (Unit can be operated while charging) Optional external power supply 24 VDC ±10 % and 1/2 amp maximum (customer-supplied)

Consult