Environment

Online Trihalomethanes (THM) Analyzer Model THM-100

Name: Online Trihalomethanes (THM) Analyzer Model THM-100 | Instru
SKU: ASTHM-100

More information

Description

Specifications

Parameters

Accessories

System for quantification of the sum of the 4 trihalomethanes species (CHCl3, CHBr3, CHBrCl2, CHBr2Cl) and the dominant species separately, present in drinking water samples configured for online installation in the fully automated water treatment/distribution network.

The THM-100 analyzer is based on an extraction and concentration of the analytes by the “purge and trap” (P&T) sampling technique, followed by thermal desorption and spectrophotometric detection of the compounds.

The analyzer automatically performs the calibration process.

Quantification range: 5-200 μg / L total THM

Accuracy:

Total THM: ± 10%.

Chloroform: ± 10% Chloroform: ± 10% Chloroform: ± 10% Chloroform: ± 10%

Bromoform: ± 20%.

Repeatability:

Total THM: ± 5%.

Chloroform: ± 5% at 50 μg/L

Bromoform: ± 10% at 50 μg/L

Permissible sample pressure: between 2 and 6 bar

Method of analysis: by purge and trap by thermal desorption with subsequent color generation and colorimetric assay differentiating the different species present in the sample.

Sample volume: 250mL

Average sampling time: 90-110 minutes; with sampling every 4 hours and adjustable for more or less frequent intervals

Possibility to analyze manual samples

Analyzer operating environment:

<95% relative humidity, non-condensing

5-35 ° C for CHCl3 dominant locations, or

15-25 ° C for installations with a significant amount of CHBr3

Installation requirements:

Clean, dry air: maximum 10 Lpm

Average <1.3 Lpm

Electrical: 110-220 VAC, single phase, 50/60 Hz, 150 VA

Dimensions (WxHxD): 610 mm x 1,524 mm x 406 mm