Integra L water purifier

Integra L units are designed to provide a broad spectrum of purified water for laboratory applications. Each unit is designed to feed a laboratory suite with multiple outlets using a main ring to provide a continuous supply. The water is stored in an integral 250 liter stainless steel tank. Two units are available: Integra LH for hard feed water and Integra LS for soft feed water. To provide higher grades of purified water, the basic Integra L units can be supplemented with the addition of optional polishing packages comprising separate interchangeable cylinders. For applications requiring high quality water with enhanced bacterial specification, UV disinfection and 0.2 μm filtration are available in an optional BIO package. Additional features:

• Unique compact unit that purifies, stores and distributes laboratory water
• Produces up to 600 l/h
• Provides ASTM Type I, II or III water and BS EN ISO grade 1, 2 or 3 water.
• It uses reverse osmosis technology, along with activated carbon and particulate filtration as part of the first stage of purification.
• Integrated data logging for traceability of standard-equipped performance
• Delivered factory tested for ease of installation
• LCD touch screen for easy operation.

UNIT:
Dimensions (H x D x H): 1000mm x 750mm x 1800mm
Maximum Shipping Weight: 310Kg
Maximum Working Weight: 550Kg
Installation requirements:
Power supply: Single phase, 230 V, +/- 10 %, 50 Hz
Feed water: Potable*
Maximum TDS: 1000ppm
Minimum inlet pressure: 15psi (1bar)
Maximum inlet pressure: 90psi (6.2bar)
Feed water temperature: 1-35°C
Flow rate: –
Free Chlorine: Must be dechlorinated
*Softened feed water is required for 600 l/h (Integra LS). Integra LH can operate with hard water up to 400 ppm as CaCO3.

SYSTEM:
Pure water storage: 250 liters
Display panel: LCD screen
Pre-treatment: 5 μm pre-filter
Reverse Osmosis: Low Energy Membranes
Deionization: Di-packs optional *
Microfiltration: 0.2 μm optional **
Ultraviolet lamp: 254nm optional **
Purified water make-up flow @ 10°C: 200 – 600 l/h ***
Purified water distribution: Up to 3000 l/h
Carbon dioxide degassing: – Carbon dioxide degassing: – Carbon dioxide degassing: – Carbon dioxide degasification
TOC reduction: Optional*
* 10, 15, 18 MΩ.cm polishing deionization packages available including activated carbon for TOC reduction
** Included in BioPack
*** Softened feed water required for 600 l/h (Integra LS). Integra LH can operate with hard water up to 400 ppm as CaCO3.

TREATED WATER:
Conductivity: < 30μs/cm*
Bacteria: > 99 % rejection**
Organics – TOC (ppb): < 50***
Particles: 0.2 μm**
Endotoxins: 0.25 UE/ml**
* To improve organic and inorganic quality, the unit can be equipped with 10, 15 or 18 MΩ.cm polishing deionizer packages.
** The optional BioPack will provide purified water with a total viable count of <1ufc/ml, endotoxin level <0.25 UE/ml and particles <0.2 μm.
*** Typical level, depends on feed water

Water Purification
Reverse Osmosis

Consult