Environment

Fixed refrigerated sampler model 5800

More information

Description

Specifications

Parameters

Accessories

– Corrosion and weather resistant refrigerated sampler. Easy to program guided menu, with software in Spanish.

– The controller regulates the temperature and stores in memory a history to ensure that the cooling of the sample has been adequate. This information can be downloaded to a computer with a basic program and can also be displayed on the instrument’s display.

– Robust, resistant and environmentally friendly.

– Advanced filling system:
The 5800 has a highly accurate peristaltic pump pumping system that allows sampling at the EPA recommended rate of 0.6 m/s even at a pumping height of 8 meters.

Composite or sequential sampling.
Operating temperature from -29 to 49 ºC, without the need for additional heaters.
Efficient, high-performance cooling, thanks to its high-power compressor.
Four digital alarm outputs
Input for 4-20 mA flow meter signal and DC pulse input.
Memory for storing four sampling programs.

Sampler:
Dimensions (HxWxD): 132 x 74 x 84 cm
Weight: 83.5 Kg
Housing: LLPDE (Linear Low Density Polyethylene)
Power supply: 230 VAC, 50 Hz
Operating Temperature: -29 to 49 ºC

Cooling system:
Programmable temperature: 0 to 8º C.
Accuracy ±1º C.
Cooling speed: 5 minutes from 24º C to 4º C.
Temperature measurement of inside, outside and compressor.

Sample compartment temperature recording, 24-hour summary exportable to computer.
Corrosion protection of condenser, compressor, evaporator and refrigeration tube.

Possible bottle configurations to choose from:

24 1-liter wedge-shaped polypropylene jars.

24 round 350 ml glass bottles.

24 Propak support bottles with disposable bags (1 l)

4 jars of 10 l in polypropylene

4 10 l glass jars

2 round polyethylene jars of 10 liters.

2 round 10-liter glass jars.

1 10 l polyethylene round jar.

1 10-liter round glass jar.

1 Propak support bottle with disposable bags.

1 polypropylene round bottle of 20 l.

1 20-liter round glass jar.

Pump:
Peristaltic pump operation.
Suction tube:
Length: 1 to 30 m
Material: Vinyl or Teflon
Internal diameter: 9 mm (3/8 inch)

Pump tube life: typically 1,000,000 revolutions.
Pump tube life counter, alerts user for replacement.
Maximum suction lift: 8.5 m.
Typical repeatability: ±5 ml or ±5 % of average volume, whichever is greater at a suction lift of 7.5 m.
Accuracy (at 7.5 m suction lift): ±10 ml or ±10 % of programmed value, whichever is greater.
Controller:
Input for flowmeter signal: 5 to 15 VDC and 25 ms contact closure pulses. 4-20 mA input
Digital alarms: 4 programmable outputs; 5V 100 mA
Number of composite samples: Programmable from 1 to 999 samples
Protection: NEMA 4X, 6 (IP67)

Water sampling

Software

Other accessories according to application, please consult us

Pide información de Fixed refrigerated sampler model 5800